Why Bathtub Refinishing is the most affordable way to Repair Your Bathtub instead replace it.
With a sense of urgency, you should
approach repairing your tub if your bathtub is cracked. Water can collect
beneath the tub and will cause damage to the structure of your home or
eventually turn into dangerous mold if it is seeping into the cracked surface.
 |
| Bathtub Repair Dallas |
Over time, a major renovation and repair of your home will include the Bathtub Repair at Fort Worth. In order to fix structural damage, this can include the complete tear-out of your bathroom or mold removal.
Bathtub Repair or Refinishing is clearly picking
its pick as it is cost effective, cheap and at the same time (if done by a
professional) gives a like-new look as well. Whereas, replacing a new one is
more expensive and more difficult efforts needed to fix it.
A process of applying a polyurethane coating is
known as Tub refinishing or Tub Reglazing. In order to renew or enhance the
appearance of your fixture, it is done. To prolong the life of the finish, Tub
Refinishing must be cared for in the same manner and is somewhat the same as
the finish on a vehicle.
Our services include –
In order for the reglazed finish to last there are
a number of things, one must do. The lifespan of your finish may be cut down
drastically if you do not follow these basic care steps. This, as a
consequence, may also void any warranty given to you.
The tile, fixtures and other areas of the bath are
in great condition in most cases, and it would be a waste of money and time to
replacing those areas.
This
is when repairing a damaged or cracked bathtub and bathtub refinishing is a
cost-effective and feasible solution. To the existing surface, the colors of
existing tubs can be matched and Fiberglass bathtubs can be repaired easily
during your Tub Repair in Mckinney.
The cost as compared to a full replacement is
pennies on the dollars. In a matter of hours, a resurfacing and refinishing job
can be completed where other options require work that requires the full use of
your bathroom, contracts, and weeks of preparation. The morning after the job
is completed; you can begin to use your new tub in most cases.
Save
time with refinishing your tub
In it the next day, you can bathe or shower as
refinishing a tub can take four or five hours. And in a matter of days, you can
refinish the other tiles, countertops, and fixtures. It can take weeks to
replace a tub and it can add up to a whole lot of inconvenience if it’s your
only bathtub.
Resurfacing gives a brand new look to
your tub
Some people believe that a newly remodeled bathroom
is awesome. And they’re right partly. Of course, there are advantages attached
to a completely remodeled bathroom.
At the same time, you would be happier to witness
the rejuvenation of your bathroom achieved by resurfacing existing countertops
and fixtures. At a fraction of the cost of remodeling, It will give a whole new
look.
|
For a
better understanding, check what Wikipedia describes it as –Bathtub
refinishing also known as bathtub resurfacing, bathtub
reglazing or bathtub re-enameling is the process of
refreshing the surface of a worn, damaged bathtub to a like-new
condition. This process typically involves removing the drain(Aan important
step that improves coating life-span but is not always possible) and
repairing any damaged areas, including checking to see if the bathtub holds
water after draining. Chips or cracks are repaired
using Bondo or another type of polyester putty. After repairs
are made the surface is prepped with an acid etching. Etching and wet
sanding provide mechanical adhesion and clean the
surface. Porcelain, enamel, and fiberglass tubs are non-porous and do
not provide a good substrate for the new coating to attach to.
Etching the surface provides a porous surface that will allow proper
adhesion. Another possible method is to apply an adhesion-promoting bonding
agent like silane to the surface before applying the coating. The
two methods can be used in unison or independently. The greatest adhesion is
generally achieved by using both methods together however, some newer
refinishing processes claim they do not require the use of etching, by
relying on silane alone. After preparing the surface, Prior to
spraying any chemical coatings, most refinishers will protect themselves and
their clients by completely masking the areas that can be affected by
overspray and setting up a professional exhaust system rated to work with the
type of coating system being applied. This is important for many reasons, the
greatest being a possible fire or explosion hazard. Then the refinisher will
use a NIOSH-rated fresh-air supplied breathing apparatus to and spray
suite and gloves to protect themselves from the chemicals being used in the
process.
|
Conclusion
To
remedy the problem, a Bathtub
Repair at Fort Worth is a surefire way. Without entering
into an expensive home improvement contract, you can have this with your
fingers crossed. You can rest assured that in the proper manner, you are caring
for your newly refinished tile or tub.
About the Author:
DFW Tubs is a small company specialized in Bathtub
Refinishing & Repair, Restoration, and Reglazing. We offer these services
in the Dallas and all of DFW areas. Whether heavily stained or it has severe
scum buildup, we refinish tubs on-site without needing to remove them.
Visit our site for more
Details: https://dfwtubs.wordpress.com/2019
Comments
Post a Comment